Newest Lessons from Making Orgonite TB’s

Here’s my latest batch of Tower Busters (TB’s) that I poured for my yard, garden, and home, bringing my total of orgonite devices up to 22 TB’s, 48 minis, and 1 charging plate.


10 of the TB’s are in the back yard, placed in areas that needed them the most, such as some trees that were looking kind of sick, and then spaced out in other areas as well, including one at the base of our pear tree; we’ll see what effect it has on our pears this year.  Additionally, I placed 10 or so minis in potted plants, and am taking weekly videos to judge their progress, if any.  Two more full sized TB’s, and two minis, were placed in the front yard, which is really small, just to give some energetic protection and DOR to POR transmutation ability to the front of our home.

From what I have learned first hand, you must make sure that you have enough hardener (catalyst) mixed into the resin on cooler days, as I did a pour in the garage while it was raining, and my full sized TB’s didn’t harden at all.  I was forced to use a blow dryer on them for a while to get them to harden up enough to remove from the pan, and then needed additional curing time in a heated cooler, because of their noxious fumes, and they were still tacky to touch as well.  Needless to say, it took me a few days to get them fully cured in this cool weather, and they still smell a bit noxious…lesson learned! Since I live in Belgium, I need to buy extra hardener to compensate for the cooler temperatures.

I’m also having a bit of a difficult time with the various metals I have tried, getting it filled up without it coming out the top of the TB’s, and the sides and bottoms don’t have enough metal either.  I think I may buy some steel BB’s to compensate and weigh down the metal swarf (shavings and filings) I received from a machine shop for free, but BB’s are quite a bit more pricey in Belgium than in America.  My father purchased 6000 Daisy steel BB’s for around $10, which was enough for 12 TB’s, but the cheapest I can find is around €33 ($45) for the same amount.  Making your own orgonite is not as cost effective in Europe, even with free metal swarf from machine shops!  If anybody has some ideas about how to pack more metal into TB’s without it popping out the top, I’m open to ideas, thanks!




Some additional thoughts, I can really feel these buggers, especially when I had them outside of my window while I was surfing the net last night, I could feel them doing their thing immediately, my head was full of energy from them.  Also, when I was blow drying them two nights ago, standing upwind from their fumes, they would take the DOR from the blow dryer and convert it immediately to POR, which I felt in my head as well, in fact, it was a massive head rush experience.  Lastly, I have found that I need to drink extra water when I’m working near orgonite, because I’m going to the bathroom much less, and feeling dehydrated near them; this is probably due to the same reasons why it is good to drink extra water after an EFT or Reiki session, all of the energy flowing makes extra hydration necessary.


About Nathan & Aline

------- Enjoy the article? Leave a tip in our PayPal Tip Jar -------
Other Amount:

2 Responses to “Newest Lessons from Making Orgonite TB’s”

Read below or add a comment...

  1. Rocky says:

    Nathan, love your post! It’s always great to see other people making legitimate powerful orgonite, and it looks like you’re doing a great job! I wanted to give you my tip for metal to use in your devices. When all else fails and I can’t find the type of metal shavings I like to use, I feed sheets of aluminum foil through a paper shredder. I then have to cut the strips up into smaller pieces, but it works great! I have made some wonderful orgonite using aluminum foil scraps as the main metal. It may not look as pretty as BBs or machine shavings, but it gets the job done at a fraction of the price! I really hope this helps, but if there is anything else I can do, just let me know. Keep up the good work!

    • Thanks Rocky, that sounds like a good idea, I don’t have access to a paper shredder, but I may be able to find something else to try. I have an ion air tester on order, I’ll have to try a few different configurations to see what works best for the price. Thanks again for the idea!